We, at Saru Silver, manufacture and export a wide range of copper based brazing alloys containing phosphorus. These alloys alleviate brazing on copper to copper in air without the use of fluxes and use of flux recommended for copper alloys like brass and bronze. We also supply silver brazing alloys containing lower phosphorus alloys for amended ductileness and electrical conductivity. They are predominately used in refrigeration, air conditioning and plumbing industry.

Preforms Available
Our broad and effective range of brazing alloys are easily available in variety of preforms. One can pick up any of these suits a particular application. They are :

• Wire & Strip Preforms
• Strips and Rods
• Wires
• Wire Flattening
• Spheres & Granules

Specifications

Saru Silver Grade of Brazing Alloy	Nominal Composition %			Melting Range	International Standards		Technical Details	MSDS
	Ag	Cu	P	°C	DIN:8513	AWS:A5.8

SILVER 15	15	80	5	650-800	L-Ag15P	BCuP-5	To be provided
	Silver 15 has low melting point with good flow. It is applied where narrow joint include mismatched junctures, refrigeration industry, on parts such as brass distributors, cuplings, manifolds, capillary pipes. It has beneficial mechanical features at low temperature.

SILVER 6	6	88	6	695-795	-	BCuP-4	To be provided
	It is with low melting range where temperature is a component. quick flow, very fluid at brazing temperature and will penetrate joints with small clearances.

SILVER 5	5	89	6	650-810	L-Ag5P	BCuP-3	To be provided
	It is same as Silver 15 and also economical. It is commonly applied in the refrigeration and air conditioning industry.

SILVER 2	2	91.5	6.5	650-810	L-Ag2P	BCuP-6	To be provided
	It fills moderate gaps in poorly fit joints and has good flow. It has the ability to fill wide joint clearances at the lower end of its brazing range. At the high end of the brazing range, it is more fluid. Recommended for sanitory and refrigerating installations. It satisfies moderate gaps in badly fit joints and has good flow. It has the power to fill wide joint headways at the lower end of its brazing range. At the high end of the brazing range, it is more liquid. It is generally recommended for sanitory and refrigerating installments.

PHOS. COPPER 1	-	92.7	7.3	705-800	L-CuP7	BCuP-2	To be provided
	It is a low priced alloy with extensive melting range and low liquidness. It is used in sanitory, refrigeration and air conditioning industry.

PHOS. COPPER 2	-	93.8	6.2	710-880	L-CuP6	-	To be provided
	It is one of the most economic stuff and is applicable where the joint clearance is wider and Flow is dull.

SILVER 1	1	92.5	6.5	650-810	-	-	To be provided
	Same as Silver 2 with Lesser Silver.

Send Enquiry